Showing posts with label Lambretta. Show all posts
Showing posts with label Lambretta. Show all posts
Saturday, 14 July 2012
Monday, 4 June 2012
MAKING A MUDFLAP
THE MUD-FLIPPER
I've always thought that mudflaps give a nice finishing touch to any vehicle. I loved the look of the big flap on the back of some of the old Lambrettas.
So I decided I'd make one for Bobi.
After considerable debate....too light, too heavy... to flexible, too stiff...I finally decided to attach the flap with a hinge. This way, there would be very little strain on the rear fender.
The flap is made from a divers flipper. The heal and foot cover were removed with a pair of scissors (easier and safer than a Stanley knife). The bottom part of the flipper faces to the rear. I had to trim some off the bottom to provide enough road clearance when the scooter is off stand and bearing weight. (This can be done after it is attached).
The Union Jack adds a Mod touch!
![]() |
| Divers Flipper Mudflap |
| Whiskey Creek, B.C. |
![]() |
| Cameron Lake,B.C. |
Friday, 11 May 2012
ABOUT THE LAMBRETTA DUE 50
GREAT LITTLE BIKE!
I like it's look. The European-style projector beam vertical headlight/marker light ( not the usual side by side). The comfy 2-up seat. The sturdy mirrors. The old fashioned gauges. The 12" rugged Duro (in Canada) tires. The peppy 2-stroke engine. The finish. The handling. The ride. Even down to the rubber rear brake lever protector shroud!
I chose this one over the Yamaha BWS, firstly because it was better value, and secondly....because it's a LAMBRETTA!
Yeah, yeah, the Lambretta snobs will say it's an imposter...but it's still a Lamretta.
Listen, I've owned a Lambretta innocenti... it was a 1965 LI 150. I loved it .....but this new Lambretta is way more reliable! Much less maintenance, bigger and better tires, no sloppy gear and clutch cables to adjust and replace, a rear brake that actually works and a fantastic front disc brake!
I've been riding my "Bobbie Dazzler" for a year now... to work and back 5 days a week. Only 3 snow days when I couldn't! We've done nearly 3000 km. together.
I've been riding my "Bobbie Dazzler" for a year now... to work and back 5 days a week. Only 3 snow days when I couldn't! We've done nearly 3000 km. together.
This little Dooay may not have the speed of the Li 150 but it's still quick off the mark! Only thing I miss is the wide front leg protection.
| "BOBBIE DAZZLER"..Bobbi, for short. |
Labels:
AAA,
about,
DUE 50,
Duro tires,
Lambretta,
Lambretta snobs,
Yamaha BWS
REAR LUGGAGE RACK
REAR LUGGAGE RACK AND GIVI BOX
I searched Lambretta USA, and Lambretta Canada, for a rear rack...but no luck. I finally found the right one at Herchee (Adly).
Herchee (ADLY MOTO) is the manufacturer of this bike. The basic model is actually a PANTHER 50. Lambretta just put a few extra touches to the model. I'm glad they did..'cos I love the name!
Shipping is a little high but very quick! Every part for this bike is available from Herchee. I have the complete parts list...let me know if you need a part #.
REAR LUGGAGE RACK :- Herchee part #81200-159-000. Due 50/ Panther 50.
BOX IS by GIVI :- Micro 2.
DUE 50 SPECS
SPECS
LIGHTS AND FUSES
Engine/Model DUE50 - 2 Stroke
Front Lights 12V 35W/35W
Position Lights 12V 5W
Rear Light / Brake Light 12V, 5W / 21W X 1
Signal Lights 12V, 10W X 4
Speedometer Light 12V, 3.4W, 1.7W
Oil Indicator Light (2 Stroke Only) 12V, 1.7W
Signal Indicator Light 12V, 1.7W
High Beam Indicator Lights 12V, 1.7W X 1
Safety Fuse 7A
Battery 12V 7A
Spark Plug (standard) 2T: NGK BPR7HSA
Fuel Tank Capacity 6L
Gear Oil Capacity 80W/90 0.12 Liter (0.09 Liter for
exchange)
Disc Brake Fluid DOT 4 or 3 Brake Fluid
DUE 50 SERVICE
DUE 50 SERVICE INTERVALS
Brake fluid At least once per year
2T Oil At least every six months
Transmission gear oil At least once per year
Gasoline Use within 30 days of purchase
Periodic Checks and Services for DUE 50cc 2 Stroke
ITEM 300 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 km.
FUEL FILTER Replace 4,000
BRAKE SYSTEM inspect 1,000
DRIVE BELT inspect 5,000
AIR CLEANER inspect 3,000
NUTS, BOLTS Tighten 1,000
GEAR OIL Replace 5,000
CARBURETOR Inspect 5,000
SPARK PLUG inspect, clean, or replace 3,000
TIRE Inspect 1,000
BATTERY Inspect 1,000
PULSE AIR FILTER Inspect or Replace 5,000
MUFFLER/CATALYST Inspect 5,000
FUEL LINE InspectI 5,000
Notes: 1. R: Replace, A: Adjust, C: Clean, T: Tighten, I: Inspect and clean 2. Follow intervals after last listed service.
Check every 5000Km, replace if worn, cracked or glazed
Change filter every 5000 Km or as needed
Clean or replace every 2000 Km or as needed
(Regular Service Mileage (KM
Third Service 2000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Inspect pulse air filter.
Inspect muffler catalyst.
Inspect fuel line.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Fourth Service 3000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Fifth Service 4000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Sixth Service 5000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Replace drive belt.
Change air cleaner filter.
Replace gear oil.
Replace pulse air filter.
Inspect muffler catalyst.
Inspect fuel line.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Seventh Service 6000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Replace fuel filter.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Eighth Service 7000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Ninth Service 8000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Tenth Service 9000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Clean scooter before delivery
Eleventh Service 10000km— DUE 50cc 2 Stroke
Check all lights, horn and switches for proper function.
Inspect battery and clean terminals.
Inspect and clean spark plug, replace if necessary.
Inspect brake system, check brake fluid level.
Adjust rear drum brake.
Replace fuel filter.
Replace drive belt.
Change air cleaner filter.
Replace gear oil.
Replace pulse air filter.
Inspect muffler catalyst.
Inspect fuel line.
Check and correct tire pressure and visually inspect
for damage.
Check and tighten all external nuts, bolts and screws.
Visually inspect scooter for leaks and damage.
Top off 2 stroke oil.
Adjust and clean carburetor as necessary.
Road test the scooter.
Document service completion.
Thursday, 10 May 2012
CUP HOLDER
FLOOR MOUNTED COLLAPSIBLE CUP-HOLDER
This thing is a must! I don't go anywhere without my coffee!
I got this one from Wal-Mart for around $12. It's a folding cup-holder designed to be attached by screws. However, I just turned it upside down so that the bottom is facing the sky, then attached 3M HD velcro to the other side and on the running board...and voila! It's been on there for a year now..still firmly fixed!
Incidentally, the cup I use is a "Contigo" from Costco...completely spill-proof...insulated for hot or cold...and tough! I can carry it on the scooter, in my pocket, or throw it in a bag..never a drop spills!
Wednesday, 9 May 2012
PHOTO GALLERY
Labels:
French Creek,
Lambretta,
Parksville,
PHOTOS,
Qualicum
HEADLIGHT and ID LIGHT REPLACEMENT
REPLACING THE HEADLIGHT
UNINSTALL
Don't be afraid...it's fairly straightforward!DO NOT REMOVE THE SCREWS AROUND THE HEADLIGHT!!! THESE ARE FOR BEAM ADJUSTMENT ONLY!!!
Step 1.
Romove the 2 screws located at the back of the front mudguard. (behind the front wheel.)
Step 2.
Carefully loosen the mudguard.
Step 4.
Remove the 4 screws located on the dash side of the front cowling.
Step 5.
Remove the 2 large screws located close to the elbows on the front cowling.
Remove the 4 screws located on the dash side of the front cowling.
Step 5.
Remove the 2 large screws located close to the elbows on the front cowling.
Step 6.
Gently unclip the front cowling until it can be leaned slightly forward at the top...giving enough room to allow the removal of the headlamp bulb.
Step 7.
The 35w.main bulb is at the centre of the inner assembly (the 1.5w.marker bulb is to the left side)
Step 8.
Slide off the attached spade connector.
Step 9.
Gently loosen the bulb-holder clip, then remove the bulb by its base.
Insert the bulb into the holder and secure the clip.
You may now remove your gloves!
Hook up the spade connector.....and that's it!
Now all you have to do is to carefully clip the cowling back into place....put in the 4 dash screws...then the 2 bottom screws....then the 2 large screws.
Carefully replace the mudguard and tighten the 2 holding screws.
Gently unclip the front cowling until it can be leaned slightly forward at the top...giving enough room to allow the removal of the headlamp bulb.
Step 7.
The 35w.main bulb is at the centre of the inner assembly (the 1.5w.marker bulb is to the left side)
Step 8.
Slide off the attached spade connector.
Step 9.
Gently loosen the bulb-holder clip, then remove the bulb by its base.
Install
*FIRST - Put on a pair of thin cotton gloves so as not to leave any grease marks on the new bulb.Insert the bulb into the holder and secure the clip.
You may now remove your gloves!
Hook up the spade connector.....and that's it!
Now all you have to do is to carefully clip the cowling back into place....put in the 4 dash screws...then the 2 bottom screws....then the 2 large screws.
Carefully replace the mudguard and tighten the 2 holding screws.
Identification Light
To replace the identification light (just above the headlight) follow steps 1-6. The id light holder has 3 screws which hold it to the cowling, 1 at the top, 1 at each side on the bottom. Carefully remove these screws and gently pull the whole assembly loose from the cowling.The bulb is at the bottom of the assembly, held in by a rubber holder. Gently pull out the holder and remove the bulb. Replace with GE 168 bulb (it's a little brighter). Place the bulb and lens assembly back in place and tighten the 3 screws.
Re-assemble the cowling as above.
Labels:
DUE 50 HEADLIGHT,
HEADLIGHT BULB,
ID light bulb,
Lambretta,
REPLACEMENT
Subscribe to:
Posts (Atom)















